January 12, 2010

Dear Sirs,

In 2006, I bought 2 kits 40% Edge 540. I build one Edge same year and  I have been flying it since then.

I like it very much. I am planning to build the second one.

Regards,

Avedis Tutunjian

November 23, 2009

Dennis and Caroline,
Last weekend another Carden 40% Edge took to the air at the Auburn Planesmen Fall Fly In. The plane was the graduation project for our large plane building course taught at the Lineville AL club shop last winter. After all the instruction Ed Cobb set about building the Edge with some help from me. He took to his first Carden like he had been doing it all his life.

As you can see, it came out just fine and he decided on the complicated colors and the layout with no regard for the hours it would take to get the covering on the plane.  He brought it to the fly in and it was the hit of the day. It sailed off the end of the runway with only a beep of down trim and it flew great. Two people flew it on the first flight and several others got on the sticks by the end of the day. Everyone loved the plane and several remarks were made about the quality and durability of this plane.

As usual, it is a fully capable plane that will not limit any pilot regardless of the skill level.  It has: DA 150 on K&S cans, 4 ea 7955 Hitec servos on the wings, 2 ea 7955 Hitec servos on the elevator, 1 ea Seiko servo on the rudder - powered by 3900 ma lithium ion auto switched by receiver.  2 ea. 5200ma for main power into 42% 12/24 power expander.  1 ea. 2600ma for ignition power backed by 42% ign. reg. and kill switch.  JR radio and receiver.

I have awarded him a graduation certificate and I think we may have created a dedicated builder from the ranks of the ARF people. Ed has ordered an Extra from you and he will go it alone this time. 

Thanks for your usual fine support and airframe design.
Brian Deis
dream-rc-airplanes.com

November 16, 2009

October 15, 2009

Hi Dennis & Caroline,

Built by Watz Custom Aircraft. Red Bull Edge 540 and all my other Cardens and friends!  A 35.6# 3D monster.

DA 150 for power JR 8711 all around. See all the photos of our Carden'SSSSSSSSSS it was a great day !!!!!

James Dean Peters

August 26, 2009

May 12, 2009

May 8, 2009

Dennis and Caroline,

Here is my latest 40% Carden Edge.  I covered it in the Red Bull Kirby Chambliss scheme from a couple years ago.

I'm approaching 60 flights on it now and it is fly's awesome.  From precision to 3D this plane handles whatever you through at it.

May 6, 2009

The pic with 3 planes, the one on the left is Mark Jorgensen Middle, Roger Nemitz, Right is mine  Jeff Schmidt

April 7, 2009

Dennis and Caroline
Another Carden has hit the air and it is a grand success. Roger Brown and the club members in Lineville, AL are shown in some of the attached shots of the new 40% Carden Edge 540 and it is the best of all the Cardens I have had the pleasure of building.

Today was the first flight and it came off the end of the runway at 1/2 throttle and required no trim adjustments to fly hands off.  The CG was on the back of the zone you show on the plans and it flies with no down elevator when inverted.  After the first flight Roger flipped up to high rates and it was a spectacular site to see it fly straight and clean knife edges on both sides without pulling and no mixing.

The hover was effortless and it did torque rolls without making any adjustments in flight. The two of us flew it and the only change might be a bigger tank so we could fly it longer at a time.  We hated to land a plane that is a good time machine.

I thank you both for making airplanes we can build for our customers and know the first flight will be like this every time.  The end of the day brought smiles from all who attended and there are several new Carden fans to add to the list.
Brian Deis
Dream-rc-Airplanes

Here is another Edge to add to your List.
 

Wally Balfour,
Phoenix AZ
 

May 6, 2008

Raplh Foll's Edge 540

Your Friend,

Ralph

April 30, 2008

I finally finished my dream plane.

It has a DA-150 , Futaba 14Mz for Guidance, Futaba 9156's on the wings, and JR 8711s on the tail surfaces .

First flight required two click's of up trim, after that it was like an old friend, what a sweet plane.

Thanks,

Tom Holt 

September 12, 2007
Hi Caroline and Dennis,

I have at 5 flights on my new 40% Carden EDGE 540 and I really love this plane.

First of all, I think it is the best looking Carden to date. It is looks amazing and fly very well

I have never used any trim for this plane on first fly, it flies by his own.  I would like to thank you for your EDGE 540 kit. It was my first carden build but will not be my last.

Thank you, however here have few photos for you reference

Kent Wang

July 3rd, 2007
Hi Caroline and Dennis,
 

 I can't remember if I ever sent you these pix of my finished Edge.  I love it!

Bert Sparrow, Lt Col, USAF

February 8th, 2006
Hi Caroline and Dennis,

Here are a few pictures of my new 40% Edge 540. It was professionally built  by Jim short and he did an excellent job building it. I can't say thanks enough to Jim for the superb job he did.

Its powered by a DA 150 on stock mufflers, True Turn spinner, Futaba radio gear with a I4C Isolator. Hitec 5955TG servos with Fromeco batteries and regulators, and swings a 32x10 Bambula Prop.
It's covered in Monokote with Aero Graphix decals. Thanks Brian Zang for all the help!  I'm just waiting on a nice day to test fly it, I will pick a nice non windy day for the maiden.

I just wanted to say thanks for all the help that you gave me from the start! The Quality of the kit is second to none and I want to say thanks to you and Dennis for producing such a great plane!

Gene Rushing - Michie, Tennessee

Dec 6th, 2005
Hi Caroline and Dennis,
I thought I would send you a picture of my new 40% Edge. I got into the air a few weeks ago.  Its my 6th Carden and my favorite to date.  It is powered by a DA150 with KS cans and JR control.  The airframe was  beautifully built by Ron Kahl and I covered, painted, and assembled.  Total weight without fuel is 38 lbs!  I can't decide what Carden next,  but will decide soon!
Keep the great designs coming.   Chris Fabbro

Oct 10, 2005
Hi Caroline and Dennis,

Here are some pictures of my new 40% Edge. What a great flying plane!!

It has been well worth the time building and so far I only have around 20 flights on it.

Thanks for all you help on the phone during the build.

Thanks
James Shelley
Harriman, TN

Sept 29, 2005
Hi Caroline and Dennis,

Here are a few more pictures for your website! I now have a Don Harris Smoke pump in the edge!

Brian Grossman

Sept 15, 2005
Hi Caroline and Dennis,

This past winter I have bought a wonderful 40% Carden Edge from a buddy of mine Joe Stek.

 The airplane was built by Mark Boguszewski. 

She's powered by a DA-150 and has a Tru-turn spinner, P-Tip prop, Mini Emcotec, Sure-link arms, and Futaba Guidance.  

This is a beautiful looking and flying aircraft. I have 25 or so flights on  it and fly’s great in all aspects.

 I Love it!  I thank you for such a flawless design !  Here are a few pictures!
 

Brian Grossman , Solon, Ohio

Sept 12, 2005
Dear Caroline and Dennis,

I am so in love with my new 35% Carden Edge.   It fly's so wonderful!!!!!   It makes my flying look better than I am.  hahaha  The plane sticks where ever you put it.   I went from nervous to having a blast with it very quickly.  The plane gives you that confidence because it doesn't do anything unexpected.   I have all JR equipment in it.  8611a's on everything but the throttle that's an 8411. The DA 100 does a great job on this plane.  Another confidence builder.  I would like to thank David Payne and my son Daniel for putting this beautiful bird together for me.  Also a big thanks to Bryan Zang for doing such a great job on making and applying the graphics this bird.   And last but
not least you guys for making such a wonderful airplane!  Keep up the great work!   Take care and I look forward to seeing you guys again.
Sincerely, Owen Maupin -  Chattanooga TN

Aug 24, 2005
Dennis and Caroline,  

Jim Short built me a 40% Carden Edge and I test flew it today - for over  30 years I've heard of people bragging about an airplane that required zero trim

 - well today I lived it 

- what a beautiful machine (very little coupling - beautiful snaps and spins - and transition from harrier to hover better than anything I have ever flown. 

 All in all, I couldn't be happier.

Thank you Jim, Dennis and Caroline.

Mike Padron

July 21, 2005
Dennis and Caroline,

I don’t think I ever sent you photo’s of my 40% Edge. I love this airplane. It is the best ever, and didn’t think anything would beat my Carden 35% Edge.

Speaking of value, I just can’t imagine purchasing giant scale airplanes from anyone else but you guy’s. 

Thanks again for another great product and your support…

Bob Rembert

July 13, 2005
Hello Caroline,

Chris from Malaysia again. Thanks for advise. CG was 3/4" aft of original during maiden flight last Sunday. I believe that my style of checking the CG was not accurate - I lie beneath the fuselage and pressed up with my thumbs (under the wing, beside the fuselage) on the marked CG point. 

The maiden flight was successful, no trims at all!!! 

Straight and level flight at mid speed was hands off the joysticks, so the CG was spot on after all. When testing the Engine for pulling power on Vertical, it went straight up, straight as an arrow without requiring any correcting inputs. Landing was so slooow, that I had to blip the throttle a wee bit just to keep the plane on the right descent height.

My friends who watched the maiden were amazed at the stability of the plane, requiring no trims and the landing that was so slow. The aileron servos are installed with longer than usual servo rails and at an angle to the horizontal plane of the aileron - I do this so that the servo leads do not bend 90 deg when installing. Have done this type of installation on 35% planes, no problems, so far. But will keep watch on this to be on the safe side.

 Only one flight, as the new engine was very rich in the midrange. Will bench run engine again before 2nd flight this coming Sunday. The weather was heavily overcast, so the pics did not turn well. 
Two words to sum it up - extremely satisfied!!! I am one happy Carden customer!!!  

Chris from Malaysia

September 14, 2005 7:54 PM
Subject: 40% Edge

Hi Caroline & Dennis

my Edge has had 175 flights now, I had one mid air but other than that it's still going strong. I am attaching a recent picture of me flying the Edge, you might want to put it on your web site

Steve Carr

  And on the 10th flight-----------------------------------

In August 2004 I phoned Carden Aircraft from the UK and spoke to someone called Dennis. I told him that I had not built an aeroplane before as I had always flown ARF's and did I need anything special to build a 40% Edge, after questioning my sanity he gingerly talked me through the build process.

  Steve Carr

April 26, 2005 - update

Dennis and Caroline,

Here are a couple more pics of my 40% Carden Edge 540 that was taken at the Merigold, Missouri Extreme Aerobatic Club event. 

This bird just gets better and better every time it gets in the air. It is reaching close to 40 flights so far and is sporting some new Kirby Kustom graphics on the bottom of the wings.

Thanks again for such a great flying plane.

sincerely,  Luke Norris

December 14, 2004

Hi,  Caroline
Here are some pics of my new 40% Edge for 2005.   She flies on rails like an Edge  should.  

I've got a 10x controlling nine 8611's, DA-150 running a Bolly 32x10 with an SWB motor mount and Duralites.  I would like to send a special thanks to Caroline for the wing bag and tail/prop covers and Mike Sauls, a great asset to the Carden community.

 Thanks! Luke Norris

Caroline and Dennis

September 9, 2004

Hi Dennis and Caroline:

Here's a couple of pictures of what came from the box you sent me. This is my 40% Edge

Its got a 3W-150 in it, its covered with Ultracote and the paint is Dupont Chroma One. Radio gear is all Futaba. It flies fantastic

 I'm waiting for the announcement of the rumor going around for my winter project. 

This is my 5th Carden plane.
Thank you, 
Walter Beike, Portage Indiana  ( see my Giles-300 here)

Sept 8, 2004